PIM Explorer
← Products

BeoLab 150

No model line recorded

Draft

Knowledge 70%

Draft record — useful, but not every fact has been fully verified yet.

Knowledge coverage

Derived from the facts and source material currently linked to this record.

  • Core data100%

    5 of 5 facts

  • Verification0%

    Draft

  • Types & variants100%

    2 of 2 areas

  • Specifications100%

    39 recorded

  • Documents0%

    0 available

  • Images100%

    10 linked

Images

BeoLab 150

External link only · product match verified

Category
Sound Systems
Family
Beolab
Years
1987
Designer
Lone and Gideon Lindinger-Loewy
Official support
Not yet verified

Current market (SE / DK)1

  • UK · launch price£588

Generations & variants1

  • BeoLab 150Original BeoLab 150

Type numbers5

  • 1721220 V
  • 1722240 V
  • 1723120 V
  • 1724100 V
  • 1725240 V

Key attributes39

  • Automatic signal switchingSwitches between standby and on depending on signal presence
  • Automatic standby operationSwitches between standby and on depending on signal presence
  • Bass level settingsLinear; +3 dB / 40 Hz; +6 dB / 40 Hz
  • Bass level switchLinear; +3 dB / 40 Hz; +6 dB / 40 Hz
  • ControlsBass boost and attenuator/sensitivity controls on pop-out front panels
  • DesignerLone and Gideon Lindinger-Loewy
  • Dimensions25 × 13 × 25 cm, W × H × D
  • Dimensions25 x 13 x 25 cm W x H x D
  • Dynamic soft clippingIncluded
  • Input connectionsRCA line-level input; speaker-level spring clips; Speaker Link DIN input
  • Intermodulation distortion1.5 dB / 8 ohms, IHF
  • Line connectionPhono socket
  • Line input connectorPhono/RCA
  • Line input impedance150 kohms
  • Line input sensitivity80 mV / 1 W; 10 V / 150 W
  • Music power output1 x 225 W
  • Power frequency50–60 Hz
  • Power output band20–20,000 Hz
  • Power output ihf1 × 150 W at 8 ohms, 20–20,000 Hz
  • Power output impedance8 ohms
  • Power output music1 × 225 W at 8 ohms
  • Power output rms din iec1 × 175 W at 8 ohms
  • Product categoryMono power amplifier
  • Protection featureDynamic Soft Clipping
  • Rated power output1 x 150 W
  • Rms power output1 x 175 W DIN/IEC
  • Sensitivity settings0 dB; -3 dB; -6 dB
  • Sensitivity switch0 dB; -3 dB; -6 dB
  • Signal to noise ratio at 150w> 100 dB A-weighted
  • Signal to noise ratio at 1w> 78 dB A-weighted IHF
  • Signal to noise ratio high power> 100 dB A-weighted at 150 W
  • Signal to noise ratio low power> 78 dB A-weighted at 1 W, IHF
  • Speaker connectionsTwo clip sockets and one four-pole DIN socket
  • Speaker input connector4-pin DIN or spring-loaded contacts
  • Speaker input impedance15 kohms
  • Speaker input sensitivity800 mV / 1 W; 10 V / 150 W
  • Speaker output connectionsDIN socket and binding posts
  • Total harmonic distortion< 0.015 %
  • Weight7 kg