Beolab 200
No model line recorded
Draft
Knowledge 65%
Draft record — useful, but not every fact has been fully verified yet.
Knowledge coverage
Derived from the facts and source material currently linked to this record.
- Core data80%
4 of 5 facts
- Verification0%
Draft
- Types & variants100%
2 of 2 areas
- Specifications100%
48 recorded
- Documents0%
0 available
- Images100%
1 linked
Images
External link only · product match verified
- Category
- Sound Systems
- Family
- Beolab
- Years
- 1990
- Designer
- Not yet verified
- Official support
- Not yet verified
Current market (SE / DK)1
- UK · launch price£588
Generations & variants1
- Beolab 200Original model
Type numbers5
- 1731220 V market · 220 V
- 1732240 V market · 240 V
- 1733120 V market · 120 V
- 1734100 V market · 100 V
- 1735240 V market · 240 V
Key attributes48
- Amplifier channels1 channel
- Audio video switchPresent on socket panel; used with Penta display panels and has no function with Beolab 200
- Bass level switchLinear, +3 dB at 40 Hz, +6 dB at 40 Hz
- Bass level switch positionsLinear; +3 dB / 40 Hz; +6 dB / 40 Hz
- Dimensions25 × 13 × 25 cm (W × H × D)
- Dimensions25 x 13 x 25 cm; W x H x D
- Line inputRCA line-level socket
- Line input connectorPhono plugs
- Line input impedance150 kΩ
- Line input sensitivity80 mV / 1 W; 10 V / 150 W
- Line input sensitivity range80 mV / 1 W; 10 V / 150 W
- Line level rca inputPresent
- Load impedance8 ohms
- Power frequency50–60 Hz
- Power linkPresent
- Power link channel selectionLeft/right selection via slide switch in front pop-out panel
- Power link connector8-pin DIN
- Power link connectorPower Link
- Power link connector format8-pin DIN
- Power link signal contentLeft and right audio signals, switching commands and display data
- Power link topologyTwo identical sockets connected in parallel internally
- Power output1 x 150 W
- Power output150 W
- Power output band20–20,000 Hz
- Power output condition1 x 150 W
- Power output music225 W
- Power output rms din iec175 W
- Product categoryMono power amplifier
- Product statusWithdrawn; not replaced
- Product typeMono power amplifier
- Product year1990
- Related product contextBeoLab 200 was used as part of the BeoLab Penta active loudspeaker range
- Related service manualBeoLab 150 Service Manual listed by Beoworld
- Sales configurationSold in pairs
- Sensitivity switch0 dB, -3 dB, -6 dB
- Sensitivity switch positions0 dB; −3 dB; −6 dB
- Signal to noise ratio at 1 w> 78 dB A-weighted
- Signal to noise ratio at 150 w> 100 dB A-weighted
- Signal to noise ratio at 150w> 100 dB, A-weighted
- Sold asPairs
- Speaker inputSpeaker Link
- Speaker input connectorDIN 4-pin or spring-loaded contacts
- Speaker input impedance15 kΩ
- Speaker input sensitivity800 mV / 1 W; 10 V / 150 W
- Speaker input sensitivity range800 mV / 1 W; 10 V / 150 W
- Speaker linkPresent
- Total harmonic distortion< 0.015 %
- Weight7 kg